MACRO HOBBY HK 香港遙控模型

Castle Creations Mamba X Sensored 25.2V WP ESC And 1512-1800KV Sensored Combo #0250004

HKD 2,000.00

數量

已售出： 0

簡介

+ The Castle Mamba X Waterproof 1/8 Brushless Combo is a pint-size powerhouse. The Mamba X ESC has been combined with the ROAR APPROVED 1512 1.5Y 1800kv motor to give lighter 1/8th scale buggies, 4wd short course trucks and bashers under 9 pounds another option to overpower their rigs! The Mamba X represents the latest and greatest in Castle Creations ESC technology, and it delivers amazing race capabilities for 1:8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with Castle's most popular 15 Series Motors. The ROAR APPROVED 1512 1.5Y 1800kv motor is normally paired with the 1/8th scale Mamba Monster X ESC; but if you need to save some weight or can benefit from a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than ~9lbs and geared for no more than ~45 MPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever-loving snot out of your vehicle, Castle recommends picking up the Mamba Monster X combo (CSE010-0145-05). Features: Wide 2S to 6S input voltage range ((3-4S LiPo MAX w/1512-1800KV MOTOR) Sensored Motor Support (Castle X-Series Sensor Harness Included) Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30mm Cooling Fan Integrated 4mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts Motor: 4-POLE 12-SLOT Rebuildable Design QUIETSENSE™ Technology ROAR Standard Sensor Port and Labeled Connections High-Performance 0.2 mm Steel Lamination Stacked Stator High-Strength Kevlar Wrap High-Strength, 180° C Grade, Neodymium Sintered Magnets Oversized, Low-Resistance, Gold-Plated Solder Tabs Oversized NMB Bearings M3 and M4 @ 25mm Mounting Hole 4mm male Castle Bullet Connectors 210mm length Sensor Wire Optional cooling fan coming soon Silicone coated sensor board Specifications: Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (25.2V) (Max 4s with included motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) Size: 2.14x1.39x1.18" (54.4x35.2x30.0mm) Weight (with wires): 3.56 oz. (101g) Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector required Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1512 - 1800kv motor. Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in the package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Motor: Input Voltage Range: 3-4S LiPo Kv: 1800 Max. RPM: 60,000 Size: Length: 67.7mm Diameter: 40mm (41.4mm with fins) Weight (w/wires): 385g / 13.6oz Shaft Size: Length: 20mm Diameter: 5mm Mounting Hole Specifications: M3 and M4 @ 25mm Cooling Fan: Optional, coming soon! Connectors: 4mm male Castle Bullet Connectors, includes 210mm length sensor wire. Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs. (ROAR 1/8 MOD APPROVED) Max. Recommended Vehicle Weight: See application guidelines Running modes: SMARTSENSE™, Sensored only Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water-resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. NOTE: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high-quality 25C batteries such as Traxxas® Power Cell). Experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. A high-current connector designed for high-powered electric systems, rated for 70+ amps is required. Invest in connector sets made for high-powered electric systems such as Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs Product weight: 610.00 grams Package size: 15.00 x 17.00 x 10.00cm Factory description: Castle Creations Mamba X Sensored 25.2V WP ESC And 1512-1800KV Sensored Combo Manufactured by Castle Creations Manufacturer number: CA/010-0155-06

付款、送貨及退貨

+

送貨方式

  • 順豐速運自取服務
  • 香港 本地取貨
  • 實體店自取

付款方式

  • PayMe
  • 銀行轉帳

退貨及退款政策

Welcome to MACRO HOBBY HK 👉官方網站📱: https:/www.macrohobby.store 👉Facebook📱: https://www.facebook.com/Macro-Hobby-HK-105999314285179/ 👉Instagram📱: https://www.instagram.com/macro_hobby_hk/?hl=zh-hkinsta 👉葵興地址🏠:葵興華星工業大廈10樓 👉營業時間⏱:星期一至星期日(1300-2000)如果營業時間有變，將會在Facebook專頁公布，敬請留意 👉付款方式💰:現金，銀行轉賬，另設有轉數快，PayMe(66972989) 另外設有八達通，支付寶和微信支付🚨 👉取貨方式:⚠️只提供自取點自取或者順豐到付 👉 WhatsApp服務範圍如下👇👇👇落單，訂貨，查詢產品價錢，產品存貨狀態P.S. 請勿語音，來電，whatapps來電 ⚠️⚠️⚠️貨物出門恕不退換 如果對貨品有任何問題請即時向店員查詢 🚨🚨請所有顧客細閲MACRO HOBBY換貨政策🚨🚨 ⒈ 訂單一經提交 ，便無法再作出修改，下單前請務必核實所有內容。 ⒉ 所有貨品貨物出門恕不退換，下單時請仔細考慮。 ⒊ 客人如選用順豐速運作為送貨方式，即同意該公司關於快件派送的條款及細則，並承擔貨品有可能因速遞時而損毁的風險。故”完美主義者”建議前往門市取貨。如貨件寄出後收方未有在合理時間內取件或聯絡跟進快件，或者運輸公司無法聯絡上收方，收方將有機會被運輸公司收取存倉費、或快件被放棄、處置或變賣。為確保客人的權益，如訂單發貨後一星期內仍未有收到快件，請儘快主動聯絡我們或運輸公司查詢快件狀況。如因收方長期未取件或運輸公司無法聯絡上收方而導政快件報銷，MACRO HOBBY HK將不對此導致的任何損失或損害承擔責任。 ⒋ 如自取點取貨時發現貨品有品質問題，將作以下安排： ．現場購買或取貨：請於購買或取貨時檢查清楚貨品，如有任何問題，必須即場提出，貨物出門恕不退換 ⚠️⚠️⚠️順豐到付：任何產品一經寄出，不設任何售後/退換服務 🚨請注意，門市即場檢查的所有貨品如果出面任何問題只限更換同款貨品，不設退款。 MACRO HOBBY HK保留一切修訂條款及細則之權利，毋須另行通知。 如有任何爭議，將以MACRO HOBBY HK之決定為最終裁判。

你可能感興趣的商品