Hobbywing EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +18T Motor (KV 5400)+Programcard Combo Set
This Hobbywing Ezrun combo set (Combo-A1) is same as the Hobbywing Ezrun combo (Combo 15-car) plus new features, please scroll down the description for full details
Motor Description:
This is the EZrun Brushless Sensorless 18A-SL-H (Version 2.0 USB Supported) +18T Motor (KV 5400)+Programcard Combo Set for RC cars and trucks.
Design: Sensorless-Based
Operated with: Brushless ESC
Size: Similar to Brush Motor 130
Diameter: 30 x 20.5 x 20.5 mm
Fixed Motor Screw Hole: Hole A Length: 16mm, Hole B Length: 14mm, Hole C Length: 12.5mm
Rotor for Gear: 1.98 mm
KV: 7800
ESC Description:
The EZrun series brushless controls (Version 2.0) include ESC of 18A, 25A and 35A for RC cars and trucks.
With 3 running modes: Racing mode (Forward), Forward/Backward mode and NEW Rock Crawler mode.
Especially designed for RC car, with excellent start-up, acceleration and linearity features
Compatible with sensorless brushless motor
Use top quality of electronic components to enhance the current endurance and capacity of the ESC.
4 steps of maximum reverse force adjustment
Proportional ABS brake function with 4 steps of 4th – 11th maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called “Punch”) from “soft” to “very aggressive”.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
Waterproof and dustproof.
Easily program with only one button and compatible with pocket-sized program card.
Dustproof design for the motor.
Motor uses top quality materials: ---Aluminium shell (case) ---High quality magnets ---Copper wires of high temperature endurance ---Good quality bearings.
Burst Current: 50A
Resistance: 0.01 ohm
Suitable Car: 1/18, 1/16 car
Suitable Brushless Motor: > 12T (2030 brushless motor)
Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
BEC Output: 6V/1A
Motor Type: Sensorless Brushless Motor
Dimension: 31.5 x 27.5 x 15 (mm)
Weight: 19g (Without wires)
12T Senserless Brushless Motor (1 Pc)
Program card (1 Pc)
Cable Tide (2 Pcs)
Shrink Tube (3 Pcs)
Hobby Wing Decal (1 Pc)
Instruction
Feature:
For: 1:18 RC
The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).(NEW)
Specification:
Turns: 18 T
Cont. Current: 18A
Include:
EZrun-18A-SL-H (Version 2.0) (1 Pc)
