田宮 58738 1/10 RC遙控車 XM-01 PRO 底盤套件
【Front Motor 4WD for Rally Fun!】
This compact shaft-driven 4WD chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via front and rear propeller shafts. A longitudinal upright battery pack is positioned in the left side, contributing to optimum balance. Changing the rear section allows a choice from three wheelbases. The 4-wheel independent double wishbone suspension has aluminum-cylinder oil dampers. Front caster angle is 5 degrees, and hub carriers and uprights allow two types of ground clearance, while the front bumper skid angle reduces surface contact.
【Featured Components】
Drivetrain:
Front & rear oil-filled gear differentials (two 39T and one 40T included)
Front & rear universal drive shafts
Full ball bearings
Suspension:
Aluminum oil dampers (blue caps)
5-degree caster suspension mounts
Turnbuckle upper arms
Chassis:
Polycarbonate chassis cover
Front bumper with skid angle
Hi-torque servo saver
Heavier equipment is placed in the middle of the chassis, and the battery has an upright position.
The steering setup uses a 3-piece tie-rod with adjustable turnbuckle shaft.
The front suspension has 5 degrees of caster thanks to its mount.
Skid angle applied to the front bumper helps minimize speed loss.
A closer look at the rear wishbone design suspension.
Blue anodized caps and aluminum cylinders are used in the oil dampers.
New front hub carriers and rear uprights let you choose ground clearance.
Change the rear construction to switch between the three wheelbases.
The three wheelbases.
High performance oil-filled differential gears are employed front and rear.
S and M/L wheelbase propeller shafts are included.
11-spoke wheels are paired with rally block tires.
The polycarbonate chassis cover also features wheel well covers.
【Specifications】
Length: 308mm (with 225mm wheelbase) Width: 165mm
Choice of 210mm, 225mm and 239mm wheelbases
Bathtub frame
Front midship motor, shaft-driven 4WD
Front/rear oil filled gear differentials
3-piece steering tie-rod
4-wheel independent double wishbone suspension
Aluminum cylinder oil dampers
Gear ratio = 8.27:1 (with kit 22T pinion; 13 ratios between 10.71 and 6.28:1 are possible with separately sold pinions)
【Separately Required Items】
2-channel R/C system w/ESC
Servo motor for steering (Low-profile servo is recommended.)
Body
Type-540 Motor
R6/AA/UM3 batteries for transmitter
Battery pack & charger
【以下需另購】
2ch 遙控裝置 & ESC電子變速器
轉向用伺服摩打 (推薦使用矮身伺服摩打)
車殼
540型摩打
發訊器用AA電池
遙控車用充電池及充電器
