V4 Type D:
ob1-RC 4-Channel Professional LED System V4 Type D for RC Drift, touring cars…#BL-V4D
Description:
This is ob1-RC 4-Channel Professional LED System V4 Type D
(Successor of V3.0), fits RC Drift, touring cars …
Functions:
Power supply by BEC : 5 – 7.4V Max
Max 4 RC channels (Min 1-2 channels), V4 supports High Response RC Systems, e.g.
Futaba : FASST-C1, C2 / S-FHSS / T-FHSS (SR)
Sanwa : NOR / SHR Mode
CH1: Steering (Left / Right winker lamp)
CH2: Throttle (2-level brightness brake lamp)
Toggle function (Hold brake >60% for 3 sec. to Toggle LED ON/ OFF, total 5 steps)
CH3: Toggle Flash modes
V4 Smart Toggle (Start Toggle from any position of RC channel, lever or switch…)
CH4: Manual hazard lamp
Flash mode (All LED) Toggle by pressing [SET] switch anytime (or use CH3) after power on,
V4 adds 3 more, total 10 flashing styles
LED driving Max 112 pcs, 46 pcs more than V3
Special functions:
CF plug (in Sub unit) is good for installing intercooler lamp
Fine tune your system by entering Setup Mode, for example :
EXB (Exhaust Backfire, redesigned from MUF), 3 flashing styles options
Auto hazard lamp (when CH4 is not “Manual hazard“)
Power Options (Low/ Mid/ High / Extra High) for all High power plug, each driving 2-16 LED
V4 adds 3 more HP plug, total 6,
Reverse lamp with Reverse beeper (BR3 plug, Buzzer buy separately)
Low Voltage Detection (LVD), Buzzer uses as audible alarm (Buy separately)
Features:
15 LED plugs:
FR1-3 (Front lamp)
BR1-3 (Brake lamp)
L1-2, R1-2 (Left & Right Winkers)
EXB (Exhaust Backfire)
REV (Reverse lamp)
V4 adds CL / CR (Chassis lamp)
V4 adds CF (Chassis lamp in Sub unit)
CH2 Auto-calibration on every power on, Plug & Play
Main / Sub Unit design, uses 1 cable to connect each others
External BEC may required if using high power options
Specification:
Input Voltage : 5 - 7.4V (Powered by ESC's BEC)
Battery type for LVD : LiPo 2S (User define: MAX 25.2V)
Support RC System :
All Normal Response RC Systems:PCM/ PPM (FM)/ AM
Some High Response RC Systems, for example :
Futaba : FASST-C1, C2 / S-FHSS / T-FHSS (SR)
Sanwa : NOR / SHR Mode
Dimension (Excludes cables) :
Main Unit : 45mm (L), 41.3mm (W), 11.7mm (H)
Sub Unit : 24.5mm (L), 18.5mm (W), 12mm (H)
Weight : MAIN / SUB Unit : 14g / 10g
The kit Includes:
Main unit x 1
Sub unit x 1
Main cable x 1
SET Switch cable x 1
Battery cable (LiPo 2S) x 1
User manual (ENG) x 1
Front LED cable x 1 (5mm high brightness WHITE LED 2P)
Brake LED cable x 1 (5mm high brightness RED LED 2P)
Left / Right LED cable x 2 (3mm YELLOW LED 2P)
